Cameras viewable at speed — F-150 FORScan mod (2021–2026)
Allows camera views to stay up above the normal speed cutoff.
- Module
- IPMA — Image Processing Module A (706)
- Model years
- 2021 2022 2023 2024 2025 2026
- Powertrain
- Gas (EcoBoost, 5.0L, V6), PowerBoost hybrid, Lightning EV
- Trim & equipment
- Requires 360° camera (Pro trims without it cannot use these values)
- Lightning uses different IPMA values; one-pedal drive needs FF in APIM 7D0-01-04
- Category
- Driver Assist
- Risk
- Medium risk
- FORScan setting
- No named setting documented. Use As-Built Format.
- As-Built
IPMA 706-02-02 xxxF CExx xx--
APIM 7D0-01-01 xxxx xxxx FD--
APIM 7D0-01-04 xxxx FDxx xx-- (FF if 1-pedal drive). Lightning: IPMA 706-02-02 xxxF C*xx xx-- (* = E for 22-23, A for 24-25)As published by the source below. Compare against your own backup; surrounding digits control other features.
Notes
Driver-distraction concern. Front camera remains speed-limited except in off-road modes; a 2022 owner could not get front cam at speed. Pro trims without 360 view can't use these IPMA values.
How to apply it
- Back up every module's As-Built data and keep the files somewhere safe.
- Connect FORScan with a battery maintainer on, ignition ON and engine OFF.
- Open Configuration and Programming, choose the IPMA module, open As-Built Format and edit only the digit described by the source.
- Write, follow any module reset prompt, cycle the ignition, then confirm the feature and check for new trouble codes.