Disable BlueCruise, enable Traffic Jam Assist — F-150 FORScan mod (2021–2026)

Reconfigures the IPMA so adaptive cruise uses Traffic Jam Assist and Highway Assist/BlueCruise is disabled.

Module

IPMA — Image Processing Module A (706)

Model years

2021 2022 2023 2024 2025 2026

Powertrain

Gas (EcoBoost, 5.0L, V6), PowerBoost hybrid, Lightning EV

Trim & equipment

• Depends on IPMA software level
• Lightning: not verified; values come from gas/PowerBoost trucks

Category

Driver Assist

Risk

High risk

FORScan setting

No named setting documented. Use As-Built Format.

As-Built

IPMA 706-01-01 xxx8 xxxx 8x--

As published by the source below. Compare against your own backup; surrounding digits control other features.

Notes

Alters driver-assist configuration; incorrect values can disable ADAS features or set DTCs. IPMA software level matters.

How to apply it

1. Back up every module's As-Built data and keep the files somewhere safe.
2. Connect FORScan with a battery maintainer on, ignition ON and engine OFF.
3. Open Configuration and Programming, choose the IPMA module, open As-Built Format and edit only the digit described by the source.
4. Write, follow any module reset prompt, cycle the ignition, then confirm the feature and check for new trouble codes.

Sources

• docs.google.com — docs.google.com/spreadsheets/d/1-_e09lLPPeSHoO3SsNwyqu5v3dgpbluvJcezUItTSVI/edit#gid=16973