Enable aftermarket remote start — F-150 FORScan mod (2015–2020)
Configures the BCM to accept an aftermarket/add-on remote start; optionally removes the double-press horn chirp.
- Module
- BCM — Body Control Module (726)
- Model years
- 2015 2016 2017 2018 2019 2020
- Category
- Comfort
- Risk
- Medium risk
- FORScan setting
- No named setting documented. Use As-Built Format.
- As-Built
BCM 726-22-02: xxx1 xxxx xxxx
optional BCM 726-38-02: xxx0 xxxx xxxx (disables horn honk on 2 lock presses)As published by the source below. Compare against your own backup; surrounding digits control other features.
Notes
Remote-start climate/duration menus are added separately via IPC 720-02-02 (see IPC tab of the spreadsheet).
How to apply it
- Back up every module's As-Built data and keep the files somewhere safe.
- Connect FORScan with a battery maintainer on, ignition ON and engine OFF.
- Open Configuration and Programming, choose the BCM module, open As-Built Format and edit only the digit described by the source.
- Write, follow any module reset prompt, cycle the ignition, then confirm the feature and check for new trouble codes.