Bambi mode (fogs with high beams) — F-150 FORScan mod (2015–2020)
Lets the front fog lamps stay on together with the high beams, for extra light on dark rural roads.
- Module
- BCM — Body Control Module (726)
- Model years
- 2015 2016 2017 2018 2019 2020
- Trim & equipment
- Fog-lamp-equipped trucks
- Baseline values differ by package (e.g. 502A/Tech Package)
- Category
- Lighting
- Risk
- Low risk
- FORScan setting
- No named setting documented. Use As-Built Format.
- As-Built
BCM 726-27-01: xxxx xxx0 xxxx (not remembered after key cycle) or xxxx xxx0 01xx (high beam/fog state remembered after key cycle)As published by the source below. Compare against your own backup; surrounding digits control other features.
Notes
Off-highway use only; running fogs with highs may be illegal on public roads. Baseline 726-27-01 values differ by package (e.g. 502A/Tech Package), so edit only the indicated digits.
How to apply it
- Back up every module's As-Built data and keep the files somewhere safe.
- Connect FORScan with a battery maintainer on, ignition ON and engine OFF.
- Open Configuration and Programming, choose the BCM module, open As-Built Format and edit only the digit described by the source.
- Write, follow any module reset prompt, cycle the ignition, then confirm the feature and check for new trouble codes.
Sources
- docs.google.com — docs.google.com/spreadsheets/d/1uDSQ1Z5a2Wt8-kjrSiVSlDFGFHnfeuhb3RTMVz95730/edit
- forum.forscan.org — forum.forscan.org/viewtopic.php?t=11175
- adventurousway.com — www.adventurousway.com/blog/ford-f150-forscan-hacks
- woofthebeatenpath.com — woofthebeatenpath.com/bambi-mode-enable-fog-lamps-with-high-beam-ford-f150/