Fogs with high beams (2011-2014) — F-150 FORScan mod (2011–2014)
Sets fog lamps to stay on with the high beams (Bambi mode).
- Module
- BCM — Body Control Module (726)
- Model years
- 2011 2012 2013 2014
- Trim & equipment
- Fog-lamp-equipped trucks
- Category
- Lighting
- Risk
- Low risk
- FORScan setting
- No named setting documented. Use As-Built Format.
- As-Built
BCM 726-11-01: xxx* xxxx xx (0=fogs disabled, 1=fogs enabled no high beam, 2=fogs enabled with high beams)As published by the source below. Compare against your own backup; surrounding digits control other features.
Notes
Same line as DRL type; edit only the indicated digit. Off-highway use.
How to apply it
- Back up every module's As-Built data and keep the files somewhere safe.
- Connect FORScan with a battery maintainer on, ignition ON and engine OFF.
- Open Configuration and Programming, choose the BCM module, open As-Built Format and edit only the digit described by the source.
- Write, follow any module reset prompt, cycle the ignition, then confirm the feature and check for new trouble codes.