DRL type select (2011-2014) — F-150 FORScan mod (2011–2014)
Chooses which lamps act as daytime running lights: low beams, fogs, or turn lamps; optionally adds the park lamps.
- Module
- BCM — Body Control Module (726)
- Model years
- 2011 2012 2013 2014
- Category
- Lighting
- Risk
- Low risk
- FORScan setting
- No named setting documented. Use As-Built Format.
- As-Built
BCM 726-11-01: x*xx xxxx xx (1=low beam, 2=fog lamps, 3=turn lamps)
BCM 726-12-01: xxxx x*xx xx (DRL uses park lamps: 0=disable, 1=enable)As published by the source below. Compare against your own backup; surrounding digits control other features.
Notes
Park-lamp DRL lights ALL park lamps including taillights. DRL feature must also be present (726-09-01 xxx*). The last byte of each 11-14 line is a checksum. 2009-2010 trucks use a GEM, not this BCM.
How to apply it
- Back up every module's As-Built data and keep the files somewhere safe.
- Connect FORScan with a battery maintainer on, ignition ON and engine OFF.
- Open Configuration and Programming, choose the BCM module, open As-Built Format and edit only the digit described by the source.
- Write, follow any module reset prompt, cycle the ignition, then confirm the feature and check for new trouble codes.