Headlamp switch remembers last position — F-150 FORScan mod (2021–2026)
Stops the headlamp switch from defaulting to Auto at every start; it reverts to the last position used.
- Module
- BCM — Body Control Module (726)
- Model years
- 2021 2022 2023 2024 2025 2026
- Powertrain
- Gas (EcoBoost, 5.0L, V6), PowerBoost hybrid, Lightning EV
- Category
- Lighting
- Risk
- Medium risk
- FORScan setting
- No named setting documented. Use As-Built Format.
- As-Built
BCM 726-74-01 xx01 xxxx xx-- (Lightning thread: 726-74-01 xxx* xxxx xx-- change 0 to 1)As published by the source below. Compare against your own backup; surrounding digits control other features.
Notes
As-Built field per sheet: HeadlampPosAtIgnOn_Cfg (0=AUTO, 1=LAST_KNOWN). Lightning thread warns about ending up driving at night on DRLs with no tail lights.
How to apply it
- Back up every module's As-Built data and keep the files somewhere safe.
- Connect FORScan with a battery maintainer on, ignition ON and engine OFF.
- Open Configuration and Programming, choose the BCM module, open As-Built Format and edit only the digit described by the source.
- Write, follow any module reset prompt, cycle the ignition, then confirm the feature and check for new trouble codes.