Front turn signal outage detection off (LED swap) — F-150 FORScan mod (2021–2026)
Turns off bulb-outage detection on the front turn circuits so LED replacements don't hyper-flash or throw warnings.
- Module
- BCM — Body Control Module (726)
- Model years
- 2021 2022 2023 2024 2025 2026
- Powertrain
- Gas (EcoBoost, 5.0L, V6), PowerBoost hybrid, Lightning EV
- Trim & equipment
- Only needed for LED bulb retrofits
- Lightning: not verified; values come from gas/PowerBoost trucks
- Category
- Lighting
- Risk
- Low risk
- FORScan setting
- No named setting documented. Use As-Built Format.
- As-Built
BCM 726-40-02 **xx xxxx xx-- (00=No Outage, 01=Outage). Front LED outage: 726-40-02 xx** xxxx xx--
Rear LED outage: 726-40-02 xxxx **xx xx--As published by the source below. Compare against your own backup; surrounding digits control other features.
Notes
Only needed when retrofitting LED bulbs. You will no longer be warned of a failed turn bulb.
How to apply it
- Back up every module's As-Built data and keep the files somewhere safe.
- Connect FORScan with a battery maintainer on, ignition ON and engine OFF.
- Open Configuration and Programming, choose the BCM module, open As-Built Format and edit only the digit described by the source.
- Write, follow any module reset prompt, cycle the ignition, then confirm the feature and check for new trouble codes.