Auto-lock setting in cluster menu — F-150 FORScan mod (2015–2020)

Restores the Auto Lock control under Settings > Advanced > Vehicle > Locks in the cluster (absent on some 2018 trucks).

Module

IPC — Instrument Panel Cluster (720)

Model years

2015 2016 2017 2018 2019 2020

Trim & equipment

Category

Display

Risk

Low risk

FORScan setting

No named setting documented. Use As-Built Format.

As-Built

IPC 720-01-01: xxxB xxxx xxxx (XL/XLT) / xxxF xxxx xxxx (Lariat and up)

As published by the source below. Compare against your own backup; surrounding digits control other features.

How to apply it

Back up every module's As-Built data and keep the files somewhere safe.
Connect FORScan with a battery maintainer on, ignition ON and engine OFF.
Open Configuration and Programming, choose the IPC module, open As-Built Format and edit only the digit described by the source.
Write, follow any module reset prompt, cycle the ignition, then confirm the feature and check for new trouble codes.

Mod	Module	Category	Years	Risk
Cluster quick boot Skips the Ford start-up animation on the instrument cluster.	IPC	Display	2015–2020	Low risk
Disable door-ajar chime Silences the chime that sounds when a door is open (e.g. with the engine running in Park).	IPC	Comfort	2015–2020	Low risk
Disable start-up triple chime Removes the three 'doo-doo-doo' chimes from the cluster at start-up.	IPC	Comfort	2015–2020	Low risk
Enable intrusion (interior motion) alarm Enables the perimeter/intrusion alarm after retrofitting factory intrusion sensors. ⚑ Requires intrusion sensor hardware	IPC	Security	2015–2020	Medium risk
Engine and transmission temps above gauges Shows engine coolant and transmission temperature readouts at the top of the 8-inch productivity cluster.	IPC	Display	2015–2020	Low risk
Seatbelt minder chime off Turns off the Belt-Minder repeating chime for driver, passenger, or both.	IPC	Comfort	2015–2020	High risk