Reverse camera on non-touchscreen radio — F-150 FORScan mod (2015–2020)
Enables a factory/retrofit backup camera to display on the base (non-touchscreen) radio display.
- Module
- FCDIM — Front Controls Interface Module (7A5)
- Model years
- 2015 2016 2017 2018 2019 2020
- Trim & equipment
- Base radio without touchscreen
- Requires camera hardware
- Category
- Driver Assist
- Risk
- Medium risk
- FORScan setting
- No named setting documented. Use As-Built Format.
- As-Built
FCDIM 7A5-01-01: x2xx xxxx xxxx
BCM 726-39-02: xxxx x1xx xxxxAs published by the source below. Compare against your own backup; surrounding digits control other features.
Notes
Requires camera hardware. Run 'BdyCM LIN New Module Initialization' afterward.
How to apply it
- Back up every module's As-Built data and keep the files somewhere safe.
- Connect FORScan with a battery maintainer on, ignition ON and engine OFF.
- Open Configuration and Programming, choose the FCDIM module, open As-Built Format and edit only the digit described by the source.
- Write, follow any module reset prompt, cycle the ignition, then confirm the feature and check for new trouble codes.