Lightning: Pro Power Onboard with truck off — F-150 FORScan mod (2022–2023)
Adds a SYNC toggle so Pro Power Onboard outlets can stay live with the Lightning turned off.
- Module
- APIM — Accessory Protocol Interface Module (SYNC) (7D0)
- Model years
- 2022 2023
- Powertrain
- Lightning EV
- Trim & equipment
- F-150 Lightning only; needs updated PCM/charge-port software
- Category
- Other
- Risk
- Medium risk
- FORScan setting
- No named setting documented. Use As-Built Format.
- As-Built
APIM 7D0-10-04 xxx* xxxx xx-- (0->
8, 4->
C, 6->
E)As published by the source below. Compare against your own backup; surrounding digits control other features.
Notes
Lightning only; standard on 2024+. Requires 2025-or-later PCM software (FDRS) or charge-port OTA PT-25.13.12 / PT-25.8.5. Livnitup's Common tab is ICE-specific; don't paste ICE values on a Lightning.
How to apply it
- Back up every module's As-Built data and keep the files somewhere safe.
- Connect FORScan with a battery maintainer on, ignition ON and engine OFF.
- Open Configuration and Programming, choose the APIM module, open As-Built Format and edit only the digit described by the source.
- Write, follow any module reset prompt, cycle the ignition, then confirm the feature and check for new trouble codes.