Heated/cooled seat and heated wheel icons on SYNC home — F-150 FORScan mod (2015–2020)
Adds heated/cooled seat (and optionally heated steering wheel) buttons to the SYNC home and climate screens.
- Module
- APIM — Accessory Protocol Interface Module (SYNC) (7D0)
- Model years
- 2015 2016 2017 2018 2019 2020
- Trim & equipment
- Only with heated/cooled seats or heated wheel
- Value differs between SYNC 3 and SYNC 2
- Category
- Audio/SYNC
- Risk
- Low risk
- FORScan setting
- No named setting documented. Use As-Built Format.
- As-Built
APIM 7D0-01-01: xxxx xxxx x2xx (Sync 3, seats) / xxxx xxxx x6xx (Sync 3, seats + heated wheel) / xxxx xxxx A6xx (Sync 2, seats
also enable Climate Quadrant)As published by the source below. Compare against your own backup; surrounding digits control other features.
Notes
Only works if the truck actually has those heated/cooled features.
How to apply it
- Back up every module's As-Built data and keep the files somewhere safe.
- Connect FORScan with a battery maintainer on, ignition ON and engine OFF.
- Open Configuration and Programming, choose the APIM module, open As-Built Format and edit only the digit described by the source.
- Write, follow any module reset prompt, cycle the ignition, then confirm the feature and check for new trouble codes.
Sources
- docs.google.com — docs.google.com/spreadsheets/d/1uDSQ1Z5a2Wt8-kjrSiVSlDFGFHnfeuhb3RTMVz95730/edit
- fconfig.com — fconfig.com/mods/heated-cooled-seat-icons
- adventurousway.com — www.adventurousway.com/blog/ford-f150-forscan-hacks
- fordraptorforum.com — fordraptorforum.com/threads/forscan-changes-tweak-your-truck.52149/