Trailer brake gain enable (2011-2014) — F-150 FORScan mod (2011–2014)
Enables the trailer brake controller gain display in the cluster.
- Module
- IPC — Instrument Panel Cluster (720)
- Model years
- 2011 2012 2013 2014
- Trim & equipment
- Requires trailer brake controller
- Category
- Towing
- Risk
- Medium risk
- FORScan setting
- No named setting documented. Use As-Built Format.
- As-Built
IPC 720-01-01: xxxx *xxx xxxx (7=TBC gain enabled, 3=disabled)As published by the source below. Compare against your own backup; surrounding digits control other features.
Notes
This nibble also encodes default language, trailer sway and rain-sensing wipers; check the IPC tab before changing.
How to apply it
- Back up every module's As-Built data and keep the files somewhere safe.
- Connect FORScan with a battery maintainer on, ignition ON and engine OFF.
- Open Configuration and Programming, choose the IPC module, open As-Built Format and edit only the digit described by the source.
- Write, follow any module reset prompt, cycle the ignition, then confirm the feature and check for new trouble codes.